Your free home assessment
James visits, gives a straight answer on suitability and a fixed estimate on the spot.
Heat pump planning permission only comes into it when an installation misses one of the national permitted development conditions, and those conditions were loosened on 29 May 2025. Miss one, with a listed house or a road-facing unit in a conservation area, and the council decides.
Key Takeaways
- Meet every Class G condition and the council never hears about the heat pump; break one and you apply.
- Since 29 May 2025 there is no 1 metre boundary rule; a 37 dB noise test at every neighbouring habitable-room window or door decides how close a unit sits.
- Sidmouth alone has four conservation areas, and in each one a unit on a street-facing wall needs an application.
- A listed home gets no permitted development for a heat pump, so the council’s consent comes before any kit is ordered.
- Choose the unit’s position before the kit, since the spot on your plot sets the planning route.
This guide covers England, since Scotland, Wales and Northern Ireland set their own rules.
Do You Need Planning Permission for a Heat Pump in Devon?
Class G, in Part 14 of the national permitted development order, already grants planning permission for an air source heat pump on a house in England, with conditions attached. East Devon, Exeter, Teignbridge and Mid Devon councils all work from that same text. Chagford sits inside Dartmoor National Park, so any planning question about a heat pump on a Chagford granite house goes to the National Park Authority.
You need air source heat pump planning permission when the house is listed, when the unit would face a road in a conservation area, when the design needs more or bigger units than Class G allows, when the position fails the noise test, or when it breaks another condition in the checklist below.
Permitted development
- Who checks You and your installer, against Class G
- Fee None
- Wait None
Planning application
- Who checks The council’s planning officers
- Fee £548 for a householder application (from 1 April 2026)
- Wait Usually decided within 8 weeks
Air Source Heat Pump Permitted Development: The Conditions to Meet
Answer these for your chosen position: a yes to any of them means an application.
Each row is a Class G condition (GPDO 2015, Schedule 2, Part 14), as in force on 13 October 2026.
Two conditions apply even when every answer is no: your installer sites the unit, so far as practicable, where it does least harm to the building’s look and your neighbours’ amenity, and you take it out once you stop using it.
What Changed in 2025: Heat Pump Distance From the Boundary and the Noise Test
An amendment order rewrote Class G on 29 May 2025, dropping the 1 metre boundary rule and the one-unit limit on detached houses.
Class G now requires the installation to meet MCS 020 a), a sound calculation that caps the unit at 37 dB at a point 1 metre outside the centre of a neighbour’s habitable-room window or door. Passing it doesn’t grant permitted development on its own, as the standard itself says. Our guide to how the 37 dB sound calculation works walks through the arithmetic.
So how close can a heat pump be to a neighbour’s house? England no longer sets a distance: a unit can sit near the fence if the calculation passes at every habitable-room window or door next door.
One unit, up to 0.6 cubic metres, at least 1 metre from the boundary
Closer than 1 metre meant an application.
Two units on a detached house, up to 1.5 cubic metres each, no boundary distance
The noise calculation now decides how close a unit can sit to next door.
1
Two units are for detached houses only.
Listed Buildings: Why Permitted Development Stops
Class G gives no permitted development to an air source heat pump on a listed building or anywhere within its curtilage, the garden and outbuildings that belong with it, so even a free-standing unit in the garden needs planning permission. Historic England adds that listed building consent is required whenever work affects the building’s special interest, which a unit fixed to its walls is likely to do.
Listed building consent carries no application fee, according to the Planning Portal’s fee schedule. Talk to the council’s conservation officer early, and see our guide to heating a listed or period home for the design side.
Consent first, then the order
Order nothing until the consent arrives, because it can fix where the unit goes and how its pipes enter.
Heat Pump Planning Permission in East Devon Conservation Areas
East Devon’s conservation areas cover parts of Exmouth, Budleigh Salterton, Lympstone, Ottery St Mary, Honiton and Seaton, among others, and four separate areas in Sidmouth, according to the government’s planning data register. Inside one, Class G still applies with one extra limit: the unit can’t go on a wall or roof that fronts a highway, or sit nearer to a road or public path bounding the plot than the house itself.
That points the unit to the back or the far side of the house. A corner plot with roads on two sides has fewer options, and a terrace whose only outside wall faces the street may need an application.
A council can also remove permitted development rights in a defined area with an Article 4 direction. A condition on your house’s original planning permission can remove them too, so check its planning history. We found no published Article 4 list for East Devon, so ask the planning team about your street, or Exeter City Council if you live in Topsham.
National Landscapes and the Jurassic Coast: What They Change
Areas of Outstanding Natural Beauty became National Landscapes in November 2023, including East Devon and the Blackdown Hills. Planning law still uses the AONB term, and Class G names neither, so a house inside one follows the ordinary conditions unless it also sits in a conservation area.
Where the coast boundary sits
The Jurassic Coast World Heritage Site starts at Orcombe Point in Exmouth, where the Geoneedle stands, and covers the land between the low water mark and the top of the cliffs or the back of the beach. Class G treats it like a conservation area, and few homes sit inside that coastal strip. If your garden runs to a clifftop, ask the council to check the boundary map.
When Your Home Does Need Heat Pump Planning Permission, and What Happens Next
A householder application asks the council to approve a position that fails a condition: £548 in England from 1 April 2026, and the government says most are decided within 8 weeks. You can apply yourself or through an agent, with the unit’s datasheet, its site-plan position and the MCS 020 a) noise calculation from the installer, which Eco Pro works out for every air source design as part of our heat pump installation service.
The route when your home needs consent
Check the designations
Your council confirms listing, conservation area and any Article 4 direction.
Walk the plot
James marks the possible positions and runs the noise calculation for each.
Apply
Householder application, listed building consent, or a lawful development certificate (half the full fee) as written proof.
Order after the decision
The design follows the approved position.
Frequently Asked Questions
Not when the install meets every Class G permitted development condition. A listed house, a road-facing unit in a conservation area or too many units means an application.
Find out which conditions your plot meets at a free home assessment.
England has set no fixed distance since 29 May 2025. The MCS 020 a) calculation must show 37 dB or less 1 metre outside each habitable-room window or door next door.
Show James where next door’s windows are at a free home assessment.
Yes, with consent. Class G doesn’t cover a listed home, so you need planning permission, plus listed building consent where the unit affects the building’s special interest.
Mention the listing when you book a free home assessment.
Yes. It can’t go on a wall or roof fronting a road or public path, or nearer a bounding road or public path than the house; elsewhere on the plot the normal conditions apply.
At a free home assessment, James marks the spots away from the road.
Not on its own. Class G adds no condition for National Landscapes, so the ordinary rules apply.
Give James your postcode when you book a free home assessment.
Either. You apply yourself or through an agent, and the installer supplies the technical parts.
Book a free home assessment before anyone fills in a form.
Find Your Planning Route on One Visit
On one free home assessment James walks the garden with you, checks your address against each designation and tells you which planning route looks likely, which the noise calculation then confirms.
Book my free home assessmentPrefer to talk it through first? Ring 01395 202030. James answers, and he is the person who will price the job.
★★★★★
“James Stalker is the most reliable man I know. He always arrives on time with a smile on his face.”
Stephen Moore · Google review